Hot Searches: Stainless Steel 316LStainless Steel 17-4PHIron basedMIMGearsWatch parts

Current location: Home » News Center » The mixing technology of metal powder injection molding

The mixing technology of metal powder injection molding

Categories: ZCMIM NewsStars: 3StarsVisit: -Release time: 2016-10-13 22:15:00
Font size:【 Large Middle SmallSource: ZCMIMEditor:NSW Author: NSW

   First put on the paraffin self-made heated to melt in the mixer, temperature of 80 ;Then add the low density polyethylene and stearic acid for blending, temperature 150 , time of 30 min;Finally mixed with powder, 2.5 h.Metal powder injection molding of feed mixing is under the joint action of shear force and heat effect.In the process, evenness H exponentially with time changing, constant, they and mixing way, powder characteristics, the agglomeration of powder and the powder surface condition.Through calculation and experimental data, and constantly optimize various process parameters, work out suitable for copper base metal powder injection molding are antifriction material binder formula and corresponding mixing parameters.

Keywords in the article: metal powder injection molding
Contact ZCMIM
  • ContactAllysha
  • Emailsales2@zcmim.com
  • Whatsapp+86-180-0258-2401
  • Skypeallysha-yuan
  • Phone0086-755-23020959
  • AddressNo.522 Zhen'An east Road, Chang'An Town, DongGuan City, Guangdong Province China
sales2@zcmim.com