Hot Searches: Gears Iron based MIM Watch parts Stainless Steel 17-4PH Stainless Steel 316L

Contact ZCMIM
  • ContactAllysha
  • Emailsales2@zcmim.com
  • Whatsapp+86-180-0258-2401
  • Skypeallysha-yuan
  • Phone0086-755-23020959
  • AddressNo.522 Zhen'An east Road, Chang'An Town, DongGuan City, Guangdong Province China
Current location: Home » News Center » ZCMIM News
Solid sintering and liquid sintering in MIM
Solid sintering and liquid sintering in MIM
Sintering is a key step in process of metal injection molding (MIM). Temperature and time control in sintering process d...
Application of Precision Ceramic Injection Molding in Automobile
Application of Precision Ceramic Injection Molding in Automobile
Ceramic injection molding process is applied on the car, have positive sense to reducing the quality of the car itself, ...
Nitrogen and argon are protective atmosphere used in sintering of metal injection molding
Nitrogen and argon are protective atmosphere used in sintering of metal injection molding
Metal injection molding technology is mainly divided into: injection, de-binding, sintering and post-processing or heat ...
Sintering method for metal injection molding products
Sintering method for metal injection molding products
Metal powder metallurgy is a metal part molding technology using metal powder or mixture of metal powder and other non-m...
Precision Control Method for Powder Injection Molding Products
Precision Control Method for Powder Injection Molding Products
The dimensional accuracy of powder injection molding products is 0.3%, while that of traditional powder metallurgy produ...
Factors affecting sintering quality of metal powder metallurgical products
Factors affecting sintering quality of metal powder metallurgical products
sintering temperature, sintering time, cooling rate, sintering atmosphere, sintering and pressing conditions can affect ...
Ten Basic Questions for PVD (Physical Vapor Deposition)
Ten Basic Questions for PVD (Physical Vapor Deposition)
Refers to metal injection molding product, the frequency of PVD is higher than that of chemical plating. For one hand, P...
Polishing Method for Metal Injection Molding Stainless Steel parts
Polishing Method for Metal Injection Molding Stainless Steel parts
At present, the most widely used polishing methods for parts made by metal injection molding are magnetic grinding and m...
The difference between Metal injection molding and Ceramic Injection molding
The difference between Metal injection molding and Ceramic Injection molding
Powder injection molding is divided into two types, one is Ceramic Injection Molding (CIM) and the other is Metal Inject...
Defects and Control of Binders in Metal Injection Molding
Defects and Control of Binders in Metal Injection Molding
Since binder as a temporary carrier in green part, it must be removed before sintering, otherwise it will adversely affe...
Control of carbon in de-bind of metal injection molding
Control of carbon in de-bind of metal injection molding
To reduce carbon content in thermal de-binding process, it is mainly considered from three aspects: 1. Reduce amount of...
Sand Blasting on Metal Powder Injection Molding Products
Sand Blasting on Metal Powder Injection Molding Products
Sand blasting is a process in which compressed air is used as the power to form a high-speed jet beam to spray the gunit...
Manufacturability design of MIM parts (process design & post-sinter process)(1)
Manufacturability design of MIM parts (process design & post-sinter process)(1)
As complexity of MIM parts increases, sliders, cores, and other tools commonly used in plastic injection molding can be ...
Catalytic Debinding Process for Metal Injection Molding Stainless Steel Parts
Catalytic Debinding Process for Metal Injection Molding Stainless Steel Parts
There are many processes for debinding: thermal, solvent, catalytic...Etc. Catamold ? catalytic debinding method is a de...
Market analysis of Chinese 3D printing industry in 2018: it is widely used in the field of military equipment
Market analysis of Chinese 3D printing industry in 2018: it is widely used in the field of military equipment
Market analysis of Chinese 3D printing industry in 2018: it is widely used in the field of military equipment.At present...
Chinese Powder Metallurgy Industry Market Trend Analysis in 2018
Chinese Powder Metallurgy Industry Market Trend Analysis in 2018
Powder metallurgy industry plays an important role in manufacturing industry. Good development of powder metallurgy indu...
Metal injection molding Short Shot defect analysis
Metal injection molding Short Shot defect analysis
When using equipment, maximum injection volume of injection molding machine must be greater than total weight of molding...
Performance characteristics of Stainless Steel 17-4PH for metal injection molding
Performance characteristics of Stainless Steel 17-4PH for metal injection molding
properties of formed products are also different, 17-4PH metal powder is a relatively common material. 17-4PH stainless...
Performance characteristics of 17-4PH, -material for metal injection molding
Performance characteristics of 17-4PH, -material for metal injection molding
metal injection molding selects metal powders of different compositions, and properties of formed products are also diff...
Method of realize drafting MIM part with internal reverse structure
Method of realize drafting MIM part with internal reverse structure
MIM Metal injection molding applied widely now, and available to process more complex structure parts. Different with pl...
Total number of records:880 | Pages:44  12345678910...>