Hot Searches: Gears Iron based MIM Watch parts Stainless Steel 17-4PH Stainless Steel 316L

Contact ZCMIM
  • ContactAllysha
  • Emailsales2@zcmim.com
  • Whatsapp+86-180-0258-2401
  • Skypeallysha-yuan
  • Phone0086-755-23020959
  • AddressNo.522 Zhen'An east Road, Chang'An Town, DongGuan City, Guangdong Province China
Current location: Home » News Center » FAQ
What does 4.8 on bolt mean?[ 10-31 08:39 ]
There are more than 10 grades of steel structure connecting bolts, including 3.6, 4.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9, etc., among which bolts of 8.8 grade or above are made of low carbon alloy steel or medium carbon steel and have undergone heat treatment (quenching and tempering), commonly known as high-strength bolts, and rest are commonly known as ordinary bolts.
What is powder metallurgy[ 10-11 08:58 ]
Powder metallurgy is Metal powder Injection molding (Metal Injection Molding) or MIM, Metal powder Injection molding technology is infiltration of inter disciplinarity of plastic forming technology, powder metallurgy technology, Metal materials and polymer chemistry.
MIM process foundation problem solving[ 09-30 08:30 ]
1. What is MIM technology? MIM is known as metal Injection Molding. The utility model relates to a manufacturing technology integrating plastic injection molding process and traditional powder metallurgy.
How to control continuous sintering of metal injection molding parts[ 09-29 10:52 ]
Continuous sintering furnace system design is divided into four different points: different devices, different working mode, different control methods, different number of contact points ,ion, In addition, PLC generally also has step control instructions for further step control.
What is the difference between regular PM and MIM?[ 09-20 08:34 ]
Due to flexibility of MIM, manufacture of complex products is not restricted. The fine metal powder combined with high temperature sintering enables MIM to produce final product with high density.
Relationship between powder loading and product shrinkage in MIM[ 08-07 08:43 ]
In MIM, in addition to influence of powder characteristics and sintering process on shrinkage and deformation, loading capacity of powder also has a great influence on shrinkage and deformation.
Density Measurement Method in Metal Injection Molding[ 07-22 08:50 ]
Metal powder metallurgy refers to fill metal alloy or its oxide, carbide powder into mold, applied high pressure for moulding, then sintering and solidification to achieve required products.
Application of sandblasting technology in metal injection molding products[ 07-16 14:16 ]
Sand blasting process of stainless steel is also a necessary procedure for many metal injection molding products.
MIM-Metal injection molding[ 07-12 13:59 ]
The MIM process is particularly suitable for mass production of relatively small, complex components requiring high strength, high performance and cost efficiency.
Product development process of metal injection molding[ 07-11 08:32 ]
MIM (metal injection molding) technology is more and more widely used in manufacture of metal parts, MIM product development process, there are seven production processes-- product development process, customer demand assessment, mold development plan, mold processing, mold test, sample production, trial production, and batch production.
What material can PVD plate on and what colors can PVD make?[ 07-02 14:08 ]
PVD film can be directly plated on stainless steel and hard alloy. For die casting part such as zinc alloy, copper and iron, it is chemical chromium plated first, then PVD plating.
Flow marks in powder injection molding[ 06-24 09:11 ]
Powder injection molding, should pay attention to flow mark, it is a common defect of MIM process.
Particle Distribution Detection Method of MIM Powders[ 05-06 08:23 ]
The particle size distribution of MIM powder is usually measured by laser particle size meter.
Mechanism of catalytic degreasing reaction[ 04-24 08:26 ]
Pre-wash: Nitrogen is injected before debinding so that the air in furnace is fully diluted and clean.
Metal injection molding advantages[ 04-09 08:56 ]
Compare with other metal molding method, advantage of metal injection molding is MIM can make more complex parts than other metal forming methods.
MIM -Metal injection molding[ 04-08 11:10 ]
Metal injection molding combines two different processing techniques - plastic injection molding and powder metallurgy.
MIM Metal injection molding[ 03-25 08:48 ]
Metal injection molding MIM can handle many materials, including iron alloy, stainless steel, copper, high temperature alloy, hard alloy, etc..
Metal Injection Molding[ 01-15 15:07 ]
Metal injection molding contains metal injection molding product design, mold design.
How to determine the ratio of metal powder and binder?[ 01-22 15:26 ]
The viscosity of products increases with the increasing of solids content. When the solids content reaches 62%, the viscosity increases sharply after injection, allowing the solids content limit (up to 62%). When the binder is not enough, there is a gap betwee...
How to control the cost during the process of MIM?[ 01-03 15:43 ]
Metal injection molding is cost-effective compared other manufacturing process when produce complex shape, small size metal components in large quantity, and what else we can do to save more money?
Total number of records:97 | Pages:512345