Hot Searches: Gears Iron based MIM Watch parts Stainless Steel 17-4PH Stainless Steel 316L

Contact ZCMIM
  • ContactAllysha
  • Emailsales2@zcmim.com
  • Whatsapp+86-180-0258-2401
  • Skypeallysha-yuan
  • Phone0086-755-23020959
  • AddressNo.522 Zhen'An east Road, Chang'An Town, DongGuan City, Guangdong Province China
Current location: Home » News Center » FAQ
Can PP be for Metal Injection Molding?[ 05-27 10:55 ]
Propene Polymer (PP) is one of the most light plastic, its yield, tensile and compression strength as well as hardness are better than that of low pressure polyethylene.
Can ABS for metal injection molding?[ 05-27 10:46 ]
Do you know how to make Apple watch adapter?. It is made by metal injection molding process. Metal injection molding can OEM custom stamping part.
What needs to use the powder metallurgy process?[ 05-27 10:34 ]
At present, China's household electrical appliances has entered a stage of stable development, household appliances and materials quality is becoming increasingly important, especially widely used in household appliances, powder metallurgy process is particula...
Cutting tools should be cut from what angle?[ 05-24 14:51 ]
Work part of the tool is to produce and processing chip part comprises a blade, the chip - breaking structure broken or furled,
What are the common defects and causes of blank pressing?[ 05-05 10:04 ]
Common blank defects and causes are as follows:(1) density is not uniform.
Why is the metal part of the metal powder injection molding injection molding it?[ 04-21 11:59 ]
Metal powder injection molding (MIM) is a new type of powder metallurgy near net forming technology which combines the modern plastic injection molding technology with the traditional powder metallurgy technology.
MIM process how to select binder?[ 04-05 13:58 ]
MIM at the time of skim, water soluble adhesive additives such as polyethylene glycol or polyvinyl alcohol, can be dissolved in warm water for easy removal. Although they are very attractive, because of low cost, environmental impact is minimal, but can not be used in MIM.
ZCMIM can do GR2 material metal? – Solutions[ 04-01 11:28 ]
The titanium alloy has a customer to ask that I can do, but can do surface treatment of plating, he asked me GR2 materials can do?
Iron base powder metallurgy and hard alloy production technology is different?[ 03-31 10:56 ]
Iron base powder metallurgy and hard alloy production process is different? Believe that there are many friends are not very understanding, let's look at the following.
What are the requirements of powder metallurgy technology?[ 03-30 11:36 ]
Powder metallurgy technology can easily realize multiple types of composite, give full play to the characteristics of each element of the respective materials, is a technology for the production of high performance metal matrix and ceramic composite materials with low cost.
MIM how can we stay long?[ 03-28 16:07 ]
MIM technology as an emerging industry, is in need of intensive and meticulous farming. Run with the others behind, basically is not too long. The rise of MIM industry, promote the mobile phone industry demand for MIM products
In the past two years, MIM technical progress is mainly reflected in what areas?[ 03-25 11:39 ]
is the first equipment level has been considerable increase: from feeding equipment, injection machine and debinding and sintering equipment, and analysis and detection equipment and automation level,
Metal powder injection molding process parameters of MIM should be how to choose?[ 03-24 11:47 ]
Many MIM metal injection molding process, even if in the industry do a few years, may not be able to understand all processes have to understand, here, and we share of MIM316L powder injection process parameter selection problems
Why powder metallurgy products will crack?[ 03-22 10:50 ]
Why powder metallurgy products will crack? The potential crack has been regarded as having a huge impact, and often become the production of complex shaped parts, for the industry participants, enhance the obtained material performance benefits only than the weight of solving the problem of crack is slightly higher.
Who is advancing behind the progress of the manufacture of large parts of powder metallurgy?[ 03-17 11:57 ]
America is promoting powder metallurgy large parts of manufacturing, investors settle on the growth prospects of this field, with a connecting rod
What are the signs of the rapid development of industrial technology in powder metallurgy?[ 03-01 16:11 ]
The rapid development of the technology of powder metallurgy industry, of China's metallurgical industry put forward more requirements, conventional metallurgical techniques with high hardness, low purity,
What is the requirement of powder metallurgy injection molding process for organic binder?[ 02-16 14:08 ]
Powder metallurgy injection molding process of metal powder particle size is generally in 0.5~20 mu m; theoretically speaking, the smaller the particle size, the larger the surface area, easy forming and sintering. The traditional powder metallurgy process uses more than 40 m of coarse powder.
What are the advantages of powder metallurgy products?[ 01-28 17:33 ]
In recent years, the powder metallurgy industry in the market to fight the fiery, but the metal powder metallurgy which has the advantages of it? Want to know with the Shenzhen MIM manufacturers ZCMIM together to see it!
Iron-based powder metallurgy and alloy powder metallurgy production process different?[ 11-27 13:56 ]
Iron-based powder is an iron-based powder metallurgy, carbide-based powder is WC, TIC and other production processes are basically the same,
How to improve precision performance of metal injection molding MIM products[ 11-23 16:09 ]
Making full assessment with customers in development stage of MIM project ,and formulate reasonable drawing requirement
Total number of records:92 | Pages:5  12345