Hot Searches: Gears Iron based MIM Watch parts Stainless Steel 17-4PH Stainless Steel 316L

Contact ZCMIM
  • ContactAllysha
  • Emailsales2@zcmim.com
  • Whatsapp+86-180-0258-2401
  • Skypeallysha-yuan
  • Phone0086-755-23020959
  • AddressNo.522 Zhen'An east Road, Chang'An Town, DongGuan City, Guangdong Province China
Current location: Home » News Center » ZCMIM News
Future Development Trend of Metal Injection Molding--- Titanium Product, Bigger Product, Smaller Product
Future Development Trend of Metal Injection Molding--- Titanium Product, Bigger Product, Smaller Product
Although much research has been done on metal injection molding titanium and titanium alloys, there have been no effecti...
2C-MIM Technology Development
2C-MIM Technology Development
In September 2018, PIM International reported that bimetallic (2c-mim) products have been put into commercial production...
The beauty of precision casting engineering is achieved by metal injection molding technology
The beauty of precision casting engineering is achieved by metal injection molding technology
Metal Injection Molding (MIM) is a new powder metallurgy near-net Molding technology introduced from plastic Injection M...
Metal Injection Molding in Future Aerospace
Metal Injection Molding in Future Aerospace
In addition to increasing productivity and improving materials and equipment, the future key task for metal injection mo...
Development status of metal injection molding in Europe (2018)
Development status of metal injection molding in Europe (2018)
EPMA estimates that the annual turnover of metal injection molding manufacturers in Europe is about $500 million. In add...
MIM powder metallurgy injection molding ceramics
MIM powder metallurgy injection molding ceramics
MIM powder metallurgy technology not only has iron base, copper base, stainless steel, alloy, titanium alloy, such as ma...
Metal injection molding helps aviation manufacturing
Metal injection molding helps aviation manufacturing
There are about 700,000 parts in a Boeing 737NG, and so far Boeing 737NG has produced more than 7,000. Many of these par...
Introduction of 8 common metal materials and metal surface treatment process (8)
Introduction of 8 common metal materials and metal surface treatment process (8)
Vapor deposition technology refers to a new type of coating technology which deposits vapor substances containing sedime...
Introduction of 8 common metal materials and metal surface treatment process (7)
Introduction of 8 common metal materials and metal surface treatment process (7)
1. Thermal spraying Thermal spraying is to heat and melt metal or non-metallic materials and spray them to surface of p...
Introduction of 8 common metal materials and metal surface treatment process (6)
Introduction of 8 common metal materials and metal surface treatment process (6)
The typical process of surface alloying is chemical surface heat treatment. It is a heat treatment process that places p...
Introduction of 8 common metal materials and metal surface treatment process (5)
Introduction of 8 common metal materials and metal surface treatment process (5)
(3) Shot peening Shot peening is a technology that ejects a large number of high-speed moving projectiles onto surface ...
Development status of metal injection molding MIM in North America(2018)
Development status of metal injection molding MIM in North America(2018)
According to data provided by MPIF at POWDERMET2019 this summer, metal injection molding MIM industry in America was des...
Development of Metal Powder Injection Molding in Asia
Development of Metal Powder Injection Molding in Asia
The main driver of Chinese metal powder injection molding growth is consumer electronics (3C) products, with 2017 data f...
Introduction of 8 common metal materials and metal surface treatment process (4)
Introduction of 8 common metal materials and metal surface treatment process (4)
1. Introduction to surface treatment process Using modern physics, chemistry, metallography and heat treatment and othe...
Vacuum heat treatment technology (5)
Vacuum heat treatment technology (5)
Vacuum annealing of mold Vacuum annealing of mold (module) is easy to achieve no oxidation, no decarburization heat t...
Vacuum heat treatment technology (4)
Vacuum heat treatment technology (4)
1. Technological parameters of vacuum heat treatment (1). Vacuum degree Vacuum degree directly affects roughness of ...
Vacuum heat treatment technology (3)
Vacuum heat treatment technology (3)
Vacuum heat treatment is a clean heat treatment process, it occupies an important position in whole heat treatment proce...
Vacuum heat treatment technology (2)
Vacuum heat treatment technology (2)
Vacuum heat treatment technology has been used in various mold steel, stainless steel, bearing steel, carbon steel, hard...
Vacuum heat treatment technology (1)
Vacuum heat treatment technology (1)
In 1970s and 1980s, vacuum heat treatment furnace which was mainly used for oil and gas quenching was developed. After t...
Industrialization of Metal Injection Molding MIM:  Materials, Production Equipment and Standards
Industrialization of Metal Injection Molding MIM: Materials, Production Equipment and Standards
The success of metal injection molding MIM industry over past two decades, particularly recent phenomenal growth in Asia...
Total number of records:962 | Pages:4912345678910...>