Automotive MIM Part
MIM Automotive Parts Gallery
ZCMIM had finished hundreds of MIM projects in Automotive, while in reason of commercial confidentiality agreement, we only can provide following information. There is no doubt that, our experienced engineering team is able to solve any issue and need in your projects.
Automotive Controller Part
- Material: Stainless steel 316L
- Size: 44.61mm×15.77mm
- Density: ≥7.8g/cm³
- Properties: Tensile strength of 510 MPa, Yield strength≥180 MPa, Hardness of 120HV10.
- Manufacturing process: Metal injection molding, Magnetic grinding, Polishing, Wire drawing.
- Material: Stainless steel 17-4PH
- Size: 62.60mm×55.34mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 316L
- Size: 19.73mm×16.75mm
- Density: ≥7.8g/cm³
- Properties: Tensile strength of 510 MPa, Yield strength≥180 MPa, Hardness of 120HV10.
- Manufacturing process: Metal injection molding, Magnetic grinding, Polishing, Wire drawing.
- Material: Stainless steel 316L
- Size: 8.60mm
- Density: ≥7.8g/cm³
- Properties: Tensile strength of 510 MPa, Yield strength≥180 MPa, Hardness of 120HV10.
- Manufacturing process: Metal injection molding, Magnetic grinding.
Automotive Connecting Part
- Material: Stainless steel 304
- Size: 58.4mm×17.43mm
- Density: ≥7.8g/cm³
- Properties: Tensile strength ≥ 500 MPa, Hardness of 120HV10.
- Manufacturing process: Metal injection molding, Magnetic grinding.
- Material: Stainless steel 17-4PH
- Size: 24.76mm×45.08mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 17-4PH
- Size: 40.51mm×21.72mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 17-4PH
- Size: 22.44mm×28.47mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 17-4PH
- Size: 14.48mm×32.55mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 17-4PH
- Size: 13.12mm×30.39mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 17-4PH
- Size: 32.64mm×45.43mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.
- Material: Stainless steel 17-4PH
- Size: 113.71mm×28.35mm
- Density: ≥7.6g/cm³
- Manufacturing process: Metal injection molding, Magnetic grinding, Passivation.