Hot Searches: Gears Iron based MIM Watch parts Stainless Steel 17-4PH Stainless Steel 316L

Contact ZCMIM
  • ContactAllysha
  • Emailsales2@zcmim.com
  • Whatsapp+86-180-0258-2401
  • Skypeallysha-yuan
  • Phone0086-755-23020959
  • AddressNo.522 Zhen'An east Road, Chang'An Town, DongGuan City, Guangdong Province China
Current location: Home » News Center » ZCMIM News
the MIM deviation problem in technology
the MIM deviation problem in technology
MIM technology has a shape change itself, but such change is predictable and usually is isotropic.And only commonly occu...
the goal of degreasing
the goal of degreasing
Skim goal is without defect and deformation of degreasing time as far as possible, and to ensure that the chemical compo...
skim temperature
skim temperature
Is important for solvent degreasing degreasing temperature, in order to not appear in the process of solvent degreasing ...
solvent degreasing model
solvent degreasing model
Macro performance solvent degreasing process is a solvent by outgoing gradually dissolve in briquette binder and purpose...
solvent degreasing
solvent degreasing
Solvent degreasing is solvent searches into the body, will be the binder ware into soluble dissolve out the process of s...
thermal degreasing in the final stages
thermal degreasing in the final stages
Binder removal is completed, through a period of up to another period of presintering, the degreasing process is complet...
Thermal degreasing process
Thermal degreasing process
Thermal degreasing process is divided into three stages: 1: the primary stage, mainly refers to the formation of the ini...
The purpose of the skim
The purpose of the skim
Skim is not the purpose of defects, in the shortest possible time removing adhesive and binder removal, the products bec...
The MIM green
The MIM green
MIM green fracture strength of 3-20 mpa, green strength can be adjusted by powder and binder, usually
The MIM parts is the problem
The MIM parts is the problem
Is a common problem in MIM parts is the final size of the inconsistent with nominal size, we can through the change of s...
mold temperature control system
mold temperature control system
Mold temperature control system is setted in accordance with the mould temperature requirements of metal injection moldi...
pin point gate
pin point gate
Pin point gate: the gate is designed based on a phenomenon that when solution speed through a small section, the effect ...
side gate
side gate
Side gate: side gate is one of the most used gate type. Section shape of side gate is generally processed into rectangul...
straight gate
straight gate
Straight Gate: also called center gate, is the simplest type. It has small flow resistance, small pressure loss, fast fe...
sprue
sprue
Sprue refers to the small short passage between end position of runner and cavity. Its function is speeding up the feeds...
MIM Feedstock Binder
MIM Feedstock Binder
MIM feedstock is a kind of suspended system of powder and binder. Its binder is commonly multicomponent, mainly composed...
Metal Injection Molding - Viscosity Measuring Instrument
Metal Injection Molding - Viscosity Measuring Instrument
Choice of viscosity measuring instrument depends on viscosity size. There are mainly two types of viscometer
The Industrialization of Metal Injection Molding
The Industrialization of Metal Injection Molding
Metal injection molding need standardize security, easily manipulated and injection defect avoiding of binder. At the sa...
Binder is An Important Part of Metal Injection Molding
Binder is An Important Part of Metal Injection Molding
The powder performance has great effect on the success of metal injection molding process. The main consideration includ...
The Purpose of Mixing
The Purpose of Mixing
The purpose of mixing is to get the best physical properties such as powder loading capacity, density, viscosity and liq...
Total number of records:870 | Pages:44  <...567891011121314...>